| Peer-Reviewed

A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses

Received: 2 December 2013     Published: 30 January 2014
Views:       Downloads:
Abstract

A numerical simulation model that predicts the thermal comfort in public transportation buses was developed. A precise approach based on the assembly of zonal and nodal models, coupled with CFD results obtained for stationary conditions, is used to simulate the thermal and air flow phenomena inside the passenger compartments. The model allows to determine the thermal (solar, passenger, and convective) loads of the bus and then to qualify the comfort level using the equivalent temperature. Simulations carried out show the influence of air distribution inside the bus on passenger’s thermal comfort.

Published in International Journal of Environmental Protection and Policy (Volume 2, Issue 1)
DOI 10.11648/j.ijepp.20140201.11
Page(s) 1-8
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Thermal Comfort, CFD, Zonal Model, Equivalent Temperature, Mannequin, Public Buses

References
[1] Nakagawa H., Fujita A.,Kanemaru J., Ozeki Y., ‘’Numerical simulation method to predict the thermal environment inside a car cabin’’ JSAE Review 22.
[2] Tanabe Schin-ichi Waseda, ‘’Numerical prediction of thermal comfort in a vehicle with solar reflection glass’’, 3-4-1 Okubo, Shinjyuku-ku, Tokyo 169-8555, Japan 2002.
[3] Han T., Huang L., and Kelly S.,‘’Virtual Thermal Comfort Engineering’’ SAE Paper, SAE 2001 World Congress Detroit Michigan March 2001, 2001-01-0588.
[4] Eusébio Z.E. Conceiçao,‘’Integral simulation of passengers and vehicles thermal response : Evaluation of thermal comfort and air quality’’– University of Algavre Portugal 2003.
[5] Mann M. and Haigis M., ‘’Numerical Investigation of the Ventilation and Thermal Comfort in a Commuter Train’’, arsenal research, Business Area Transport Technologies Vienna Austria 2001.
[6] ANSI/ASHRAE Standard 55-2013, Thermal Environmental Conditions for Human Occupancy.
[7] Fanger P O (1970). Thermal Comfort: Analysis and applications in environmental engineering. McGraw-Hill.
[8] Holmer I., Parsons K., Bohm H., ‘’Equivalent temperatures in vehicules – conclusions and recommendations for standards’’, Cabli seminar .1999.
[9] Madsen T.L., Olesen O.W., Kristensen N.K., ‘’Comparison between operative and equivalent temperature under typical indoor conditions’’, ASHRAE transactions, 1984, part 3, pp 1077 – 1090.
[10] Nilsson H. and Holmér I., ‘’Comfort diagrams for improved evaluation of indoor climate’’, The Climate Group, The National Institute for Working Life, Sweden, SE-171 84 Solna, Sweden, Proceedings of the Fourth International Meeting on Thermal Manikins, EMPA Switzerland, 27-28 Sept 2001.
[11] Pasons K.C., ‘’Human thermal environments’’, 1993 Taylor & Francis, London.
[12] http://www.dep.mines-paristech.fr/Valorisation/Ressources/MODRAY/.
[13] http://www.dep.mines-paristech.fr/Valorisation/Ressources/THERMETTE/.
Cite This Article
  • APA Style

    Youssef Riachi, Denis Clodic. (2014). A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses. International Journal of Environmental Protection and Policy, 2(1), 1-8. https://doi.org/10.11648/j.ijepp.20140201.11

    Copy | Download

    ACS Style

    Youssef Riachi; Denis Clodic. A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses. Int. J. Environ. Prot. Policy 2014, 2(1), 1-8. doi: 10.11648/j.ijepp.20140201.11

    Copy | Download

    AMA Style

    Youssef Riachi, Denis Clodic. A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses. Int J Environ Prot Policy. 2014;2(1):1-8. doi: 10.11648/j.ijepp.20140201.11

    Copy | Download

  • @article{10.11648/j.ijepp.20140201.11,
      author = {Youssef Riachi and Denis Clodic},
      title = {A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses},
      journal = {International Journal of Environmental Protection and Policy},
      volume = {2},
      number = {1},
      pages = {1-8},
      doi = {10.11648/j.ijepp.20140201.11},
      url = {https://doi.org/10.11648/j.ijepp.20140201.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepp.20140201.11},
      abstract = {A numerical simulation model that predicts the thermal comfort in public transportation buses was developed. A precise approach based on the assembly of zonal and nodal models, coupled with CFD results obtained for stationary conditions, is used to simulate the thermal and air flow phenomena inside the passenger compartments. The model allows to determine the thermal (solar, passenger, and convective) loads of the bus and then to qualify the comfort level using the equivalent temperature. Simulations carried out show the influence of air distribution inside the bus on passenger’s thermal comfort.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - A Numerical Model for Simulating Thermal Comfort Prediction in Public Transportation Buses
    AU  - Youssef Riachi
    AU  - Denis Clodic
    Y1  - 2014/01/30
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijepp.20140201.11
    DO  - 10.11648/j.ijepp.20140201.11
    T2  - International Journal of Environmental Protection and Policy
    JF  - International Journal of Environmental Protection and Policy
    JO  - International Journal of Environmental Protection and Policy
    SP  - 1
    EP  - 8
    PB  - Science Publishing Group
    SN  - 2330-7536
    UR  - https://doi.org/10.11648/j.ijepp.20140201.11
    AB  - A numerical simulation model that predicts the thermal comfort in public transportation buses was developed. A precise approach based on the assembly of zonal and nodal models, coupled with CFD results obtained for stationary conditions, is used to simulate the thermal and air flow phenomena inside the passenger compartments. The model allows to determine the thermal (solar, passenger, and convective) loads of the bus and then to qualify the comfort level using the equivalent temperature. Simulations carried out show the influence of air distribution inside the bus on passenger’s thermal comfort.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Energy and Processes, Mines-Paristech, Paris, France

  • Department of Energy and Processes, Mines-Paristech, Paris, France

  • Sections